Learn To Prevent Supply Line Damage
Stainless steel braided water supply lines are used in residential construction underneath kitchen sinks, running to dishwashers, in bathrooms, and behind clothes washers. When you experience supply line damage in one of these locations, the consequences can be lasting and severe. Fortunately, it's pretty simple to change those lines from time to time and avoid an unpleasant supply line leak.
Inspect Your Supply Lines
The key is identifying when and how often to change the supply lines. First, take a closer look at the construction of the lines. The details of specific hoses vary from one brand to another, but they generally share the following design elements.
- A hose with an appropriate diameter for the task
- A plastic or rubber inner polymer lining
- An outer stainless-steel braided sleeve
Test Your Water Pressure
One common cause of supply line damage happens when pressure levels become too high for the hoses used along the line. This pressure is measured in pounds per square inch, or psi. For example, residential water systems generally exert pressure below 80 psi but there may be spots within a single system that fall to as low as 50 psi and spots that experience water pressure up to and beyond 100 psi.
Repair Damaged Lines
There tends to be a consistent pattern as each supply link leak develops. The protective stainless-steel sleeve begins to corrode and the corrosion spreads through many of the individual strands creating the sleeve. With a tear in the outer sleeve, the inner polymer lining can no longer withstand the pressure of the water inside.
You can prevent extensive supply line damage by replacing the braided steel hose according to the terms of the warranty. Many hoses, such as plastic supply lines, should be changed every five to eight years, while steel-braided hoses can last much longer. Discuss the well-being of your hoses and avoid a bathroom leak by scheduling a diagnostic visit with a residential water supply line professional in Woodstock, GA.